DTE Project

 For this semester in DTE we had to create a project. My groups project was to make a glove that you can use a working controller. we had to but in some logs to measure our progress 18/11/21

We got all the buttons working on the glove and our step was to figure out what we would do for the wires.

19/11/21

We hooked up our wires. Then we figured out that the tape we were using was conductive and made the buttons all be pressed at once, so we had to detach the Makey Makey board off of Nathan’s back. SO then we had to use paper and wrap it around the earth wire. 

25/11/21

Holiday

26/11/21

(Nathan & Lincoln) tried taping and making the glove more efficient. 

2/12/21

We had another problem with ze wires and found out that all the wires were emitting signals to each other. Then we had to wrap those in tape as well. We finished the project and ran some test trials on Pacman after fixing minor flaws.  

I feel when making this project I learnt more about conductive martials which was an interesting thing to learn about. I feel like Nathan, Lincoln, Jacob and I all worked well in a group with figuring out the problems of the glove and fixing it till it worked and became a fun thing to make

                                                                                    .